Puente elevador de tijera Fox 50 VX

5 toneladaselectrohidráulico400V

Elevador electro-hidraúlico a tijera capacidad 5.000 kg. El elevador es ya conforme à la actualización cib fecha Agosto 2010 de la norma europea EN 1493. Versiones: N - platforma estandard - versión sobre piso CA - cavidad anterior para platos rodantes y/o detector de holguras CT - alineación total cavidad anterior con placa oscilante trasera LT - versión con elevador auxiliario para liberar las ruedas I - versión empotrada Description -The CT/LT version offers the maiximum versatility for the alignment service and any other use -The access ramps/wheel stops hinged on the platforms eliminate obstacles on the floor when the lift is raised up. -The levelling system is provided by master cylinders integrated into the hydraulic unit. -The regulating bolts on the base (12) are double to allow regulation between the floor and the base, and between the base and the Platform (with lift closed). -The front recess is 50 mm/1,9 inch deep -The rear slip plate is 2270 mm/89,4 inch long and is built in the Platform. This is steel made and moves upon plastic rolls. Furthermore, thanks to its generous dimensioning it has +-3° angle of rotation. -LT (Lift Table) 3.500 kg (7710 lbs) The lift is already according the updating of August 2010 of the european Norm EN 1493 Safety Devices: -Parahute valves on the lift and LT -Automatically-activated mechanical safety locks -Photocells for Platform synchronization control -Limit switch with acoustic warning for the complete lowering -Low voltage control circuit (24V) -"Dead -man " Controls