Product IntroductionWidely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. For the purification of insulating oil in transformers of 35KV-110KV-220KV, vacuum drying can be performed simultaneously with filtration. The dual-stage vacuum oil filter provides a dehydration and degassing system to quickly remove moisture, gases and harmful light hydrocarbons from the oil. It features a precision multi-stage filtration system to effectively remove mechanical impurities; an electric heating constant-temperature automatic control system ensures rapid and uniform oil heating and eliminates dead oil zones; it also supports vacuum pumping and vacuum oil injection functions and can perform ultimate vacuum extraction for transformers and GIS equipment to meet various on-site requirements.
Working principle and processAfter the treated oil passes through the magnetic filter, it enters the coarse filter heater for heating. The heated oil is drawn by the oil suction pump and sprayed to form a coarse fog by the spiral spray atomization system. The fog falls on the reaction tower and enters the vacuum separation chamber where moisture begins to evaporate. Multidimensional evaporation inside the tank achieves rapid purification. Oil that has been purified, dehydrated, degassed and deacidified is filtered through the precision filter under the action of the oil exhaust pump. Water vapor and air separated from the vacuum chamber are condensed and discharged; remaining hot air and gases are evacuated by the vacuum pump after cooling.
Technical parametersItem : Unit : Spec
Model : : SY/ZD-RM-150
Volume of flow : L/min : 150
L/H : L/H : 8000-10000 (Variable frequency adjustable)
Temperature control range : ℃ : 0~100
Working temperature : ℃ : 20~60
Extreme vacuum : pa : ≤20
Working vacuum degree : Mpa : -0.06~-0.099
Gas content in oil : % : ≤0.1
Work pressure : Mpa : ≤0.5
Filtration accuracy : µm : ≤1
Water content in oil : ppm : ≤3
Oil breakdown voltage : KV : ≥65
Heating power : KW : 72
Total power : KW : 80
Power supply : : Three-phase five-wire system 380V 50HZ
Inlet/outlet pipe diameter : mm : 50
Continuous working hours : H : ≥800
Trouble-free working hours : H : ≥8600
Oil quality indicators after insulating oil treatmentPerformance project : Unit : Post-processing indicators : Test method
1. Moisture content : % : none : GB/T511
2. Moisture content : PPM : ≤3 : GB/T7600
3. Pressure resistance value : KV : ≥65KV : GB, DL or IEC standards
4. Residual gas : % : ≤0.5 : Gas content measurement methods per relevant GB, DL or IEC standards
5. Acid value : : 1µm
Product features- Combination of high vacuum, high pumping speed, annular three-dimensional compound flash evaporation technology and microgram technology for rapid removal of water, dissolved micro water, free carbon and gases.
- Multi-layer polymer mesh filtration combined with strong magnetic electrostatic adsorption for impurity removal; large filtration area, strong pollutant holding capacity and high filtration accuracy (ß 3 ≥ 1000).
- Compound protection device providing automatic protection for high/low oil levels, infrared bubble detection, liquid level control, temperature maintenance and pressure protection; highly automated, sensitive and reliable.
- Especially suitable for vacuum oil injection, large-scale vacuum pumping and vacuum drying of transmission and transformation equipment above 110KV during installation or maintenance.
- Supports online oil filtration and unmanned operation; operating status displayed by indicator lights.
- Humanized design with low noise, simple operation, long maintenance intervals, low energy consumption and operational cost savings.
Function of Two-Stage Vacuum Oil FilterThe machine provides high-efficiency dehydration, degassing, filtration and drying of transformer insulating oil. Main components include: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature control and automatic oil temperature control system, electrical control cabinet, steel frame with intact non-destructive structure and smooth sprayed surface. The machine performs filtration, purification and regeneration to efficiently remove moisture, gas and mechanical impurities from insulating oil.
Caractéristiques / spécifications techniques- Model: SY/ZD-RM-150 (product example shown as UHV-344)
- Flow rate: 150 L/min (8,000–10,000 L/h, variable frequency)
- Temperature control range: 0–100 ℃
- Working temperature: 20–60 ℃
- Ultimate vacuum: ≤20 Pa
- Working vacuum degree: -0.06 to -0.099 MPa
- Gas content in oil after treatment: ≤0.1 %
- Work pressure: ≤0.5 MPa
- Filtration accuracy: ≤1 µm
- Water content in oil after treatment: ≤3 ppm
- Oil breakdown voltage after treatment: ≥65 KV
- Heating power: 72 KW
- Total power: 80 KW
- Power supply: Three-phase five-wire system 380V 50Hz
- Inlet/outlet pipe diameter: 50 mm
- Continuous working hours: ≥800 H
- Trouble-free working hours: ≥8600 H